Denso GT10Q-SR User Manual

Also see for GT10Q-HR: Operator's manual

Contents

54(8) Data verification conditions and data editing conditionsItems Parameters Defaults Refer to:Data string √Verification object in Data Verificationmode Data blockVerification start position for data stringverification From 001 to 999 positions(Specify with ASCII characters) 1Number of characters to be verified for datastring verification(Preset master registration not made)From 01 to 99 positions(Specify with ASCII characters) 99Position of data block to be verified for datablock verificationFrom 01 to 99 positions(Specify with ASCII characters) 1Disable transmission/Disable transmission √Enable code data transmission/Disable transmissionEnable code data transmission/Enable NG transmissionVerification result output(Report of match/mismatch status)Enable OK transmission/Enable NG transmissionSection 7.1Code type in data editing Selectable from codes available Any code(Note 1)PermitData transfer regardless of error result indata editing Prohibit √"Data string" extraction √"Data block" extractionData Extraction mode"AI-prefixed string" extractionHead positionTail position"Data string" extraction- Extraction start positionPosition n √Tail position √Position n"Data string" extraction- Extraction end positionBy n positions from the start position"Data string" extraction- Specification of position n for extractionstart positionFrom 0001 to 9999 positions(Specify with ASCII characters) 1"Data string" extraction- Specification of position n or n positionsfor extraction end positionFrom 0001 to 9999 positions(Specify with ASCII characters) 9999"Data block" extraction- Data block numbers (Max. 3 blocks)From 01 to 99 positions(Specify with ASCII characters) Not specified.AI-delimited mode √"AI-prefixed string" extraction AI parenthesizing modeEnableAI-delimited mode- Availability of AI #1 Disable √EnableAI-delimited mode- Availability of AI #2 Disable √EnableAI-delimited mode- Availability of AI #3 Disable √Section 7.2