Denso GT10Q-SR User Manual

Also see for GT10Q-HR: Operator's manual

Contents

67Appendix 1 SpecificationsItem GT10Q-SR/HRReadable codes QR Code (Model 1 and Model 2), MicroQR, PDF417,MicroPDF, MaxiCode, Data Matrix, and EAN.UCCComposite symbolEAN-13/8, UPC-A/E, UPC/EAN with add-on, Interleaved2of5 (ITF), Code 39, Codabar (NW-7), Code 128, EAN-128,and RSSSkew angle 360ºGT10Q-SR 0.25 mm (9.8 mils) min. for two-dimensional codes0.15 mm (5.9 mils) min. for bar codesScanningresolutionGT10Q-HR 0.167 mm (6.6 mils) min. for two-dimensional codes0.125 mm (4.9 mils) min. for bar codesElevation angle (skew) ±35°Tilt angle (pitch) ±35°Light source LED (red)Scanning specificationsReading confirmation Blue LED, beeper and vibratorInterface RS-232C asynchronousOperating voltage 100 to 240 VAC ±10%Input power requirementsPower consumption(in Auto-off mode) Max. 20 VAOperating temperature range 0 to 50°COperating humidity range 10 to 90% RH (*1 )Storage temperature range -10 to 60°CStorage humidity range 5 to 95 %RH (*1 )Environmental conditionsAmbient illuminance range Max. 10,000 luxDimensions (W) x (D) x (H) 3.2 x 4.1 x 6.5 inches (82 x 103 x 165 mm)Weight Approx. 210 g (excluding the cable)(*1 ) Sharp temperature change, dewing or freezing not allowed, wet-bulb temperature 30°C max.