Denso GT10Q-SR User Manual

Also see for GT10Q-HR: Operator's manual

Contents

40(5) Number of digitsThis optional field specifies the number of bytes in code data in four digits (4 bytes). UPC and EAN codes (exceptEAN-128) skip this field.You can select whether or not to transmit the number of digits.n1 : thousands (0 to 9)n2 : hundreds (0 to 9)n3 : tens (0 to 9)n4 : units (0 to 9)(6) Code dataThe data format for each symbology is described below.QR Code/MicroQR CodeCode data read will be transmitted as is.Split QR codesIn Edit mode and Batch Edit mode: The scanner edits code data read and then transmits it. It does not transmit the codenumber, number of splits, or parity.In Non-edit mode: The scanner transmits the code number, the number of splits, parity, and code data read. The codenumber and the number of splits are 1 byte each and the parity, 2 bytes in hexadecimal format.PDF417, MicroPDF, MaxiCode and Data MatrixCode data read will be transmitted as is.UPC-A0 S X1 X2 X3 X4 X5 X6 X7 X8 X9 X10 C/DS: Number system characterYou can select whether or not to transmit a check digit.UPC-A with add-onWith 2-digit add-on:0 S X1 X2 X3 X4 X5 X6 X7 X8 X9 X10 C/D X11 X12With 5-digit add-on:0 S X1 X2 X3 X4 X5 X6 X7 X8 X9 X10 C/D X11 X12 X13 X14 X15S: Number system characterX11-15 : Add-on code dataYou can select whether or not to transmit a check digit. A code ID mark precedes add-on code data under the conditions"Code ID mark: Type 2 (AIM)" and "Code ID mark output mode: Separating." (For details about the code ID mark, referto (4) Code ID mark on pages 37 to 39.)UPC-EX1 X2 X3 X4 X5 X6 C/DYou can select whether or not to transmit a check digit.