Denso GT10Q-SR User Manual

Also see for GT10Q-HR: Operator's manual

Contents

50Codabar (NW-7)Items Parameters Defaults Refer to:Enable, without a check digit √Enable, with a check digit(Check digit transmission enabled)Enable, with a check digit(Check digit transmission disabled)Scanning Codabar (NW-7)DisableSection 12.2Min. number of digits to be scannedfor Codabar (NW-7) 4 digitsMax. number of digits to be scannedfor Codabar (NW-7)3 to 99 digits(including start/stop codes) 99 digits(See Note 1.)Enable √Transmission of start/stop codesfor Codabar (NW-7) Disable Section 12.2Code 39Item Parameters Defaults Refer to:Enable, without a check digit √Enable, with a check digit(Check digit transmission enabled)Enable, with a check digit(Check digit transmission disabled)Scanning Code 39DisableSection 12.2Min. number of digits to be scannedfor Code 39 1 digitMax. number of digits to be scannedfor Code 391 to 99 digits(excluding start/stop codes) 99 digits(See Note 1.)EnableTransmission of start/stop codes for Code 39 Disable √ Section 12.2Code 128, EAN-128Items Parameters Defaults Refer to:Enable √Scanning Code 128 DisableEnable √Scanning EAN-128 DisableSection 12.2(See Note 2.)Min. number of digits to be scannedfor Code 128 and EAN-128 1 digitMax. number of digits to be scannedfor Code 128 and EAN-1281 to 99 digits(excluding start/stop codes and1-digit check digit) 99 digits(See Note 1.)(Note 1) The setting ranges are different from the numbers of digits that the scanner can actually read.(Note 2) Using the QR-coded parameter menu enables or disables scanning of both Code 128 and EAN-128 at the same time.