Denso GT10Q-SR User Manual

Also see for GT10Q-HR: Operator's manual

Contents

42Code 39Code data read will be transmitted as is.You can select whether or not to transmit start and stop codes ("*").Interleaved 2of5The scanner transmits code data read, starting from the character following the start code to the one preceding the stopcode. No start/stop codes will be transmitted.Codabar (NW-7)The scanner transmits code data read including the start/stop codes. You can select whether or not to transmit start/stopcodes.Code 128 (EAN-128)The scanner transmits code data read, starting from the character following the start code to the one preceding the checkdigit. Start/stop codes, FNC codes, or check digit will not be transmitted. Note that FNC1 placed in character positionsother than the 1st and 2nd ones from the start code will be converted to GS (1Dh) and transferred.RSS (RSS-14, RSS-14 Truncated, RSS Limited, RSS-14 Stacked, RSS Expanded, RSS-14 Stacked Omnidirectional,RSS Expanded Stacked)Code data read will be transmitted as is.RSS Composite symbolsCode data read will be transmitted as is.Under the conditions "Code ID mark: Type 1 (DENSO)" and "Code ID mark output mode: Separating," a separator (GS:1Dh) and 2D code ID mark are inserted between the linear component and 2D Composite component. (For details aboutthe code ID mark, refer to (4) Code ID mark on pages 37 to 39.)Under the conditions "Code ID mark: Type 2 (AIM)" and "Linear component length (RSS/EAN-128): Variable," aseparator (GS: 1Dh) is inserted between the linear component and 2D Composite component.UPC/EAN Composite symbolsCode data read will be transmitted as is.You can select whether or not to transmit a check digit of the linear component (UPC/EAN).Under the conditions "Code ID mark: Type 1 (DENSO)" and "Code ID mark output mode: Separating," a separator (GS:1Dh) and 2D code ID mark are inserted between the linear component and 2D Composite component.Under the conditions "Code ID mark: Type 2 (AIM)," the 2D code ID mark is inserted between the linear component and2D Composite component. (For details about the code ID mark, refer to (4) Code ID mark on pages 37 to 39.)