Eaton 9130 User Manual
Also see for Powerware 9130: User guideUser guideSpecificationsUser guideInstallation guide
                                                                                                  | |
Contents
|
InstallationEaton 9130 700/3000 VA UPS User’s Guide 164201718—Rev 7 www.eaton.com/powerquality 17! IMPORTANTA ribbon cable connects the LCD control panel to the UPS. Do not pull on the cable or disconnectit.NOTE Leaveribbon cableconnected.Figure 9. Removing the UPS Right Front CoverCAUTIONA small amount of arcing may occur when connecting the internal batteries. This is normal and willnot harm personnel. Connect the cables quickly and firmly.2. Connect the internal battery connector (see Figure 10).Up to 1500 VA models. Unclip the top rightmost white connector from the battery panel and move it tothe left to connect to the white connector at the top left. Connect red to red, and black to black. Press thetwo parts tightly together to ensure a proper connection. Clip the wires of the rightmost connector to thebattery panel in its new position.2000–3000 VA models. Connect red to red, and black to black. Press the two parts tightly together toensure a proper connection.sledoMAV0003–0002sledoMAV0051otpUFigure 10. Connecting the UPS Internal Batteries |
Related manuals for Eaton Powerware 9130
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine