InstallationEaton 9130 700/3000 VA UPS User’s Guide 164201718—Rev 7 www.eaton.com/powerquality 234. Plug the EBM cable(s) into the battery connector(s) as shown in Figure 16. Up to four EBMs may beconnected to the UPS.5. For each cable retention clip removed, rotate the clip and install it under each EBM cable connection usingthe retained screws.6. Verify that the EBM connections are tight and that adequate bend radius and strain relief exist for eachcable.7. Continue to “UPS Initial Startup” on page 24.1000–1500 VA Models2000–3000 VA ModelsRemove cable retention clip. Plug in EBM cable. Rotate clip. Reinstall cable retention clip.Figure 16. Connecting the EBMs
