Eaton 9130 User Manual

Also see for Powerware 9130: User guide User guide Specifications User guide Installation guide

NOTE Verify that the replacement batteries have the same rating as the batteries beingreplacedMaintenanceEaton 9130 700/3000 VA UPS User’s Guide 164201718—Rev 7 www.eaton.com/powerquality 495. Slide the new battery package into the cabinet. Push the battery package in firmly.6. Replace the battery cover plate into the slots at left, threading the battery connector through the accessslot. Reinstall the retained screws.CAUTIONA small amount of arcing may occur when connecting the internal batteries. This is normal and willnot harm personnel. Connect the cables quickly and firmly.7. Reconnect the internal battery connector. Connect red to red, and black to black. Press the two partstightly together to ensure a proper connection.8. Place the connector between the screw mounts and reinstall the retained screws.9. Replace the UPS front cover.To replace the cover, verify that the ribbon cable is protected, then insert the clips on the back of the coverinto the cabinet and push firmly to snap the cover into place.10. Continue to “Testing New Batteries” on page 52.