9 Communication9.1 AS-InterfaceRapid Link 5 · RAMO5 · RASP5 05/20 MN034004EN www.eaton.com 1999.1.12 Controlling RAMO5 via the AS-InterfaceTable 49: Controlling RAMO5• The START signal or enable for the requested operating direction isissued through DQ0 (FWD) or DQ1 (REV).• DQ2 can be used to switch the actuator output ACT Q1 to High or Low.Function Signal to RAMO5AS-Interface outputs AS-Interface inputsDQ0 DQ1 DQ2 DQ3 DI0 DI1 DI2 DI3Zero speed 0 0Anticlockwise rotating field (REV) 0 1Clockwise rotating field (FWD) 1 0Zero Speed/reset 1 1Actuator output = High 1Actuator output = Low 0Quick stop ON 0Quick stop OFF 1Automatic mode 1No automatic mode 0Accumulative error 0No accumulative error 1External input SEN I1 via M12 socketno signal 0Signal available 1External input SEN I2 via M12 socketno signal 0Signal available 1