Eaton ePDU G3 Operation Manual

Also see for ePDU G3: Troubleshooting guide Installation and connection guide Manual Installation & quick start guide Operating manual

Contents

Maintenance and AlarmsEaton ePDU G3 Operation Manual P-164000277—Rev 1 www.eaton.com/ePDU 131Uploading the Binary FileTo access the Web interface:1. Ensure that an Ethernet cable is correctly connected between a Windows PC and the Ethernet port on theePDU. Verify communication.2. Start up the ePDU and note the IP address displayed on the LCD.3. Open the Web browser and type the IP address you obtained from the ePDU.4. When the connection is made, the Authentication dialog displays.5. Enter a valid user name and password in the authentication dialog box (see Figure 78). Click Login tocontinue or Cancel to exit.NOTE The default user name is “admin” and the default password is “admin.”Figure 78. Login Authentication6. The ePDU Overview page displays.7. From the menu bar, click Settings and then System. The System Settings page displays in the MainApplication window (see Figure 79).8. In the Network Management Card panel, check Firmware upgrade enabled and click Browse to find theupgrade file.