LCD Interface OperationEaton ePDU G3 Operation Manual P-164000277—Rev 1 www.eaton.com/ePDU 51Control MenuFor Switched (SW) and Managed (MA) ePDUs only. On the Main Menu, scroll up or down to highlightControl. Press ENTER. Scroll up or down to see a list of outlet group IDs. Select an outlet group. The On/Offdrop down list displays. Select On or Off. The selected state of the outlet displays. Scroll up or down to seeother lists of outlet group IDs (if available). Press ESC to return to the previous menu (see Figure 52).ESCEnter EnterMain MenuActive AlarmsAlarms HistoryMetersControlSettingsMain MenuControlePDU InfoMain MenuA1 OnA2 OnA3A4A5 OnControlA3 OnOnOffMain MenuB1 OnB2B3B4 OnB5 OnControlB2 OnOnOffFigure 52. Example Control Submenu DisplaySettings MenuThe Settings menu provides user configuration options. Only the available options display, depending on theassigned user privileges.There are five standard Settings submenus and one optional submenu:l USB Flash mode (only available if the USB device is detected)l Displayl Daisy Chainl Languagel IPv4l FactoryOn the Main Menu, scroll up or down to highlight Settings. Press ENTER. Scroll up or down to select asubmenu and press ENTER to display the submenu options. Press ESC to return to the previous menu.Daisy ChainSettingsLCDIPv4FactoryDisplayLanguageESCEnterMain MenuActive AlarmsAlarms HistoryMetersControlePDU InfoMain MenuSettingsFigure 53. Example Settings Menu Display
