LCD Interface OperationEaton ePDU G3 Operation Manual P-164000277—Rev 1 www.eaton.com/ePDU 46Different sets of menus display depending on the type of topology you are managing or monitoring.Table 6 shows LCD menus that are valid for ePDU topologies.Table 6. Menus Available for ePDU TopologiesModelsActiveAlarmsAlarmHistoryMeter see NOTE 1SettingsePDUInfoePDUSections Outlets ControlInputPhaseTotalInput (1)TotalInput (2)Basic (BA) — — — — — — — — — —Metered Input (MI) • • NOTE2 • — • — — • •Metered Outlet (MO) • • NOTE2 • — • • — • •Switched (SW) • • NOTE2 • — • — • • •Managed (MA) • • NOTE2 • — • • • • •NOTE 1 The Meter > Environment menu is only available if an Environmental Monitoring Probe (EMP) is attached.NOTE 2 The Input Phase menu is available if the ePDU has multiple phases.NOTE 3 The Total Input (2) menu is available if the ePDU has multiple inputsActive Alarms MenuThe Active Alarms menu filters and displays only active alarms for the ePDU. Active alarm screens have priorityover other screens. When an alarm occurs, the Active Alarms screen replaces the current screen and thebacklight blinks in red and white (see Figure 44). Up to 100 active alarms can display.On the Main Menu, scroll up or down to highlight Active Alarms. Press ENTER to display the first active alarmscreen. Scroll up or down if needed to view active alarm data. When you finish your review, press ESC to returnto the previous menu. If the backlight was blinking red to indicate an active alarm, the backlight returns tonormal.ESCEnter DownNo alarmsActive AlarmsESCEnterAlarms HistoryMeterSettingsControlePDU InfoMain MenuActive AlarmsActive AlarmsCRITICALL3 over current[12.000] 13.054A09/05/201114:23:32Active AlarmsActive AlarmsWARNINGOver temperature[25.00] 26.12°C09/05/201114:23:32Alarms HistoryMeterSettingsControlePDU InfoMain MenuActive AlarmsFigure 44. Example Active Alarm Displays
