LCD Interface OperationEaton ePDU G3 Operation Manual P-164000277—Rev 1 www.eaton.com/ePDU 58Daisy Chain Discovery OptionsThe Discovery option starts communication between the Host ePDU and the Device ePDU. This is onlyavailable for the Host ePDU. The display you see varies depending on whether the ePDU is communicatingproperly or not communicating (see Figure 64 and Figure 65).From the Host ePDU, perform a Discovery as follows:1. On the Settings menu, scroll up or down to highlight Daisy Chain and press ENTER.2. Scroll up or down to highlight Discovery.3. Press ENTER to perform the discovery.l When the discovery completes successfully, the Media Access Control (MAC) address of the DeviceePDU displays (see Figure 46). Go to Step 4.l If there is no connection, the No device chained error message displays (see Figure 47). Go to theDaisy Chain Settings option screens and reset the values to correctly identify the Host. Once corrected,then select the Discovery option again.l If the Host and Device ePDUs have been incorrectly identified, a Host Conflict error message displays.Go to the Daisy Chain Settings option screens and reset the values to correctly identify the Host andDevice. Once corrected, select the Discovery option again.4. Press ENTER to validate the Discovery.5. Press ESC to return to the previous menu.MAC @: XX:XX:XXXX:XX:XXDevice: 1Place: EndOKDaisy ChainSettingsDiscoveryDaisy ChainDisplayDaisy ChainIPv4FactoryESCEnterEnterEnterESCDisplayIPv4FactorySettingsLanguageDaisy ChainFigure 64. Example Daisy Chain ePDU Discovery (Communicating)No devicechainedDaisy ChainSettingsDiscoveryESCEnterEnterDaisy ChainEnterESCDisplayIPv4FactorySettingsLanguageDaisy ChainFigure 65. Example Daisy Chain ePDU Discovery (Not Communicating)
