GE B30 Communications Manual

Also see for b30: Maintenance manual Instruction manual Instruction manual Instruction manual Communications manual

Contents

CHAPTER 3: IEC 61850 COMMUNICATION MODEL IMPLEMENTATION CONFORMANCE STATEMENT (MICS)UR FAMILY – COMMUNICATIONS GUIDE 3-11733.5.3.2 8-bit switch (Sw8bit)This element is instantiated in the following products: C30, F35, N60.Table 3-136: 8-bit switch data objectsstVal ENUMERATED ST LLN0.Beh.stVal of the Masterlogical deviceRHealth ENS Only instantiated in the Master logicaldeviceRstVal ENUMERATED ST LPHD1.PhyHealth.stVal ROn SPS Only instantiated in the Master logicaldeviceRstVal BOOLEAN ST ROff SPS Only instantiated in the Master logicaldeviceRstVal BOOLEAN ST RZero MV Only instantiated in the Master logicaldeviceRmag AnalogueValue MX Rmag.f FLOAT32 0.0 RMod ENC Only instantiated in the Master logicaldeviceR/CtrlctlVal ENUMERATED RstVal ENUMERATED ST RctlModel CtlModels CF LLN0.Mod.ctlModel 2, the code for SBO control with normalsecurity according to IEC 61850-7-2.R/CsboTimeout INT32U CF 30000 RsboClass SboClasses CF 0 (operate-once) RoperTimeout INT32U CF 0 RGrRef ORG Reference to root logical device RsetSrcRef ObjectReference SP For communications, mapped toMaster ldName if not empty,otherwise to the concatenationof the IED name and “Master”.For SCL, mapped to theconcatenation of the IED nameand “Master”.reference to the data attribute to input RMltLev SPG Instantiated only in the Master logicaldeviceRsetVal BOOLEAN SP RΣDataSet##>DATA-SET RDSMemberRef[η] ObjectReference DataSet Member η R/CLNName: Sw8BitGAPC# LDevice inst: Ctrl UR element: 8-Bit Switch #data obj. data attribute Type FC UR Name Description R/W/CIndY SPS 8BIT SWITCH # BIT Θ operand value RstVal BOOLEAN ST 8BIT SWITCH # BIT Θ RInRef1Θ ORG 8BIT SW # ARG AΘ setting. RsetSrcRef ObjectReference SP 8BIT SW # ARG AΘ setting reference to the data attribute to input R/CsetSrcCB ObjectReference SP source GoCB of input if via GOOSE R/CInRef2Θ ORG 8BIT SW # ARG BΘ setting. RsetSrcRef ObjectReference SP 8BIT SW # ARG BΘ setting reference to the data attribute to input R/CsetSrcCB ObjectReference SP source GoCB of input if via GOOSE R/CInRef01 ORG 8BIT SW # CONTROL setting. RsetSrcRef ObjectReference SP 8BIT SW # CONTROL setting reference to the data attribute to input R/CsetSrcCB ObjectReference SP source GoCB of input if via GOOSE R/CLNName: LLN0 LDevice inst: Ctrl UR element: Nameplate information for the logical nodesdata obj. data attribute Type FC UR Name Description R/W/C