7 K0430 Issue No. 2Fitting BatteriesWARNING: BATTERIES MUST ONLY BE FITTED IN A SAFE AREA.USE ONLY THE BATTERIES SPECIFIED IN THE TABLE.Caution: Old batteries can leak and cause corrosion. Never leave discharged batteries inthe instrument. Old batteries should be treated as hazardous waste anddisposed of accordingly.Switching OnPress the I/O switch on the front panel and proceed as follows:The first time that the instrument is powered up, it will power-up in BASIC mode with themain screen displaying voltage in the input display area and pressure in the sourcedisplay area. To switch to Current as input, press F1 as shown. Similarly, F1 to return toVoltage.Note: No other keys are active in this mode and the instrument can only be reconfiguredby pressing the TASK key and selecting another mode.PRESSURE INT barVOLTAGE VCURRENTUNITSPRESSURETASK: BASIC +-321Manufacturer Type No.Energizer Industrial Type EN93Energizer Type E93.LR14.C.AM2Duracell Type MN1400-LR14Varta No.4014 Type LR14.C.AM2Procell Industrial Type MN1400-LR141 Cover fixingscrews.2 Six alkaline Ccells, see table.Only use thebattery type inthe table.3 Low batteryindication.Getting Started
