K0430 Issue No. 2 30Data Log OperationsData Log is a special application of store mode which enables the calibrator to eitherautomatically log displays at preset time intervals or to manually log a display onoperation of the STORE key. Logged data is written to a user specified file.To set-up a Data Log file, proceed as follows.• Select a task, other than BASIC. If using ADVANCED, set-up the required outputparameters.• Use SETUP to select Data Log from the Store Mode Menu (See page 36).Auto Log (Timer)Press STORE and set-up the Data Log file parameters as shown below. Use CHANGEVALUE (F1) followed by cursor keys to set field values. For Auto Log, set-up TRIGGER fieldto PERIODIC.Manual LoggingEnter the file details as shown above and select KEYPRESS for TRIGGER field. Screenreverts to displayed parameters showing set-up file as shown below:• Use a combination of STORE and LOG NOW (F1) to log events as follows.Memory Operations Datalog
