K0430 Issue No. 2 22• Min/Max Process FunctionTo set-up an input display to show min/max and present input reading, enableMIN/MAX from the process menu and press F1 (SETTINGS) to provide RESETfunction. The display now shows the max/min values as follows:Reset Max/Min display at any time by pressing theF1 key.To quit max/min, press INPUT, select MAX/MINfrom process menu and switch the function off.• Filter Process FunctionTo apply the low pass filter to a selected input, enable FILTER from the processmenu and press F1 (SETTINGS) to provide access to the filter parameters. Twosettings are required, Time to Settle and Band.To examine the current filter settings and exit without change, press the EXIT key.The set-up procedure is as follows:Advanced Task Process Functions
