K0430 Issue No. 2 24Select OutputTo display an output channel, select ADVANCED mode from the task menu. The displayshows the list of output selections and, if available, the UNITS soft box (F2).The following procedure shows the method of output channel selection from two pagesof options. The second page can be obtained directly from the first by pressing the rightcursor key:Note: Left/right arrow keys function as page up/down keys.To change the output units (pressure channels only), select the channel with the cursorkeys and press F2 before pressing ENTER.Electrical Outputs (Loop Power)All the electrical outputs, the output loop must be powered from an external supply(current sinking).External connections to the front panel of the instrument are shown below.Current SinkingA Load B Barrier C (External supply 30 V dc maximum) D Safe area+-BCDB55mAVinmA inmA Sinkmax 30VCAT IIAmaxAdvanced Task Select Output
