4-12 F60 Feeder Management Relay GE Multilin4.2 FACEPLATE INTERFACE 4 HUMAN INTERFACES4There are several places where text messages may be programmed to allow the relay to be customized for specific appli-cations. One example is the Message Scratchpad. Use the following procedure to enter alphanumeric text messages.For example: to enter the text, “Breaker #1”1. Press to enter text edit mode.2. Press the VALUE keys until the character 'B' appears; press to advance the cursor to the next position.3. Repeat step 2 for the remaining characters: r,e,a,k,e,r, ,#,1.4. Press to store the text.5. If you have any problem, press to view context sensitive help. Flash messages will sequentially appear for sev-eral seconds each. For the case of a text setting message, pressing displays how to edit and store new values.d) ACTIVATING THE RELAYTo change the RELAY SETTINGS: "Not Programmed" mode to "Programmed", proceed as follows:1. Press the key until the SETTINGS header flashes momentarily and the SETTINGS PRODUCT SETUP messageappears on the display.2. Press the MESSAGE key until the PASSWORD SECURITY message appears on the display.3. Press the MESSAGE key until the INSTALLATION message appears on the display.4. Press the MESSAGE key until the RELAY SETTINGS: Not Programmed message is displayed.5. After the RELAY SETTINGS: Not Programmed message appears on the display, press the VALUE keys change theselection to "Programmed".6. Press the key.7. When the "NEW SETTING HAS BEEN STORED" message appears, the relay will be in "Programmed" state and theIn Service LED will turn on.RELAY SETTINGS:Not ProgrammedWhen the relay is powered up, the Trouble LED will be on, the In Service LED off, andthis message displayed, indicating the relay is in the "Not Programmed" state and issafeguarding (output relays blocked) against the installation of a relay whose settingshave not been entered. This message remains until the relay is explicitly put in the"Programmed" state.SETTINGSØ SETTINGS PRODUCT SETUP PASSWORD SECURITY DISPLAY PROPERTIES↓ USER-DEFINABLE DISPLAYS INSTALLATIONRELAY SETTINGS:Not ProgrammedRELAY SETTINGS:Not ProgrammedRELAY SETTINGS:ProgrammedNEW SETTINGHAS BEEN STORED
