GE Multilin L60 Line Phase Comparison System 1-131 GETTING STARTED 1.3 ENERVISTA UR SETUP SOFTWARE1Pinging 1.1.1.1 with 32 bytes of data:Destination host unreachable.Destination host unreachable.Destination host unreachable.Destination host unreachable.Ping statistics for 1.1.1.1:Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),Approximate round trip time in milliseconds:Minimum = 0ms, Maximum = 0ms, Average = 0 msPinging 1.1.1.1 with 32 bytes of data:verify the IP address is programmed in the local computer by entering the ipconfig command in the command window.C:\WINNT>ipconfigWindows IP ConfigurationEthernet adapter :Connection-specific DNS suffix. . :IP Address. . . . . . . . . . . . : 0.0.0.0Subnet Mask . . . . . . . . . . . : 0.0.0.0Default Gateway . . . . . . . . . :Ethernet adapter Local Area Connection:Connection-specific DNS suffix . :IP Address. . . . . . . . . . . . : 1.1.1.2Subnet Mask . . . . . . . . . . . : 255.0.0.0Default Gateway . . . . . . . . . :C:\WINNT>Before using the Quick Connect feature through the Ethernet port, disable any configured proxy settings in InternetExplorer.1. Start the Internet Explorer software.2. Select the Tools > Internet Options menu item and click the Connections tab.3. Click on the LAN Settings button to open the following window.4. Ensure that the “Use a proxy server for your LAN” box is not checked.If this computer is used to connect to the Internet, re-enable any proxy server settings after the computer has been discon-nected from the L60 relay.1. Start the Internet Explorer software.2. Select the “UR” device from the EnerVista Launchpad to start EnerVista UR Setup.
