GE Multilin L60 Line Phase Comparison System B-67APPENDIX B B.4 MEMORY MAPPINGBE193 ...Repeated for DCmA Inputs 18E1A6 ...Repeated for DCmA Inputs 19E1B9 ...Repeated for DCmA Inputs 20E1CC ...Repeated for DCmA Inputs 21E1DF ...Repeated for DCmA Inputs 22E1F2 ...Repeated for DCmA Inputs 23E205 ...Repeated for DCmA Inputs 24DNP/IEC Points (Read/Write Setting)E700 DNP/IEC 60870-5-104 Binary Input Points (256 items) 0 to 4294967295 --- 1 F300 0E900 DNP/IEC 60870-5-104 Analog Input Points (256 items) 0 to 65535 --- 1 F300 0Synchrocheck (Read/Write Setting) (4 modules)EC00 Synchrocheck 1 Function 0 to 1 --- 1 F102 0 (Disabled)EC01 Synchrocheck 1 V1 Source 0 to 5 --- 1 F167 0 (SRC 1)EC02 Synchrocheck 1 V2 Source 0 to 5 --- 1 F167 1 (SRC 2)EC03 Synchrocheck 1 Maximum Voltage Difference 0 to 400000 V 1 F060 10000EC05 Synchrocheck 1 Maximum Angle Difference 0 to 100 degrees 1 F001 30EC06 Synchrocheck 1 Maximum Frequency Difference 0 to 2 Hz 0.01 F001 100EC07 Synchrocheck 1 Dead Source Select 0 to 5 --- 1 F176 1 (LV1 and DV2)EC08 Synchrocheck 1 Dead V1 Maximum Voltage 0 to 1.25 pu 0.01 F001 30EC09 Synchrocheck 1 Dead V2 Maximum Voltage 0 to 1.25 pu 0.01 F001 30EC0A Synchrocheck 1 Live V1 Minimum Voltage 0 to 1.25 pu 0.01 F001 70EC0B Synchrocheck 1 Live V2 Minimum Voltage 0 to 1.25 pu 0.01 F001 70EC0C Synchrocheck 1 Target 0 to 2 --- 1 F109 0 (Self-reset)EC0D Synchrocheck 1 Events 0 to 1 --- 1 F102 0 (Disabled)EC0E Synchrocheck 1 Block 0 to 4294967295 --- 1 F300 0EC10 Synchrocheck 1 Frequency Hysteresis 0 to 0.1 Hz 0.01 F001 6EC11 ...Repeated for Synchrocheck 2EC22 ...Repeated for Synchrocheck 3EC33 ...Repeated for Synchrocheck 4Settings File Template (Read/Write Setting)ED00 FlexLogic Displays Active 0 to 1 --- 1 F102 1 (Enabled)ED01 Reserved --- --- --- F205 (none)Setting File Template (Read Only Non-Volatile)ED07 Last Settings Change Date 0 to 4294967295 --- 1 F050 0Settings File Template (Read/Write Setting)ED09 Template Bitmask (750 items) 0 to 65535 --- 1 F001 0Table B–10: MODBUS MEMORY MAP (Sheet 59 of 59)ADDR REGISTER NAME RANGE UNITS STEP FORMAT DEFAULT
