7-10 L60 Line Phase Comparison System GE Multilin7.2 TARGETS 7 COMMANDS AND TARGETS7• Latched target message: Yes.• Description of problem: A link loss detection on an Ethernet port. The link loss is due to unplugging the cable or theswitch port being down.• How often the test is performed:• What to do: Check the connection.d) WRONG TRANSCEIVER MESSAGESDescription: The type of SFP does not match the CPU type.T-type CPU = All ports support fiber SFPs onlyType: minorTarget: latchedMessage: "WRONG TRANSCEIVER"A webpage "SFP Transceiver Information" is provided. This page displays the type of the SFP in it. This data is to be usedwith the CPU type to know the cause of the problem.e) SFP X MODULE FAIL MESSAGESDescription: A faulty SFP or unplugging the SFP would generate this self test.Type: minorTarget: self resetMessage: SFP MODULE x FAILThe webpage "SFP Transceiver Information" described in the previous section applies for this self test as well. The "SFPModule Fail" has higher priority and it suppresses the "Ethernet Fail" target message. The "SFP MODULE FAIL FUNC-TION" setting enables/disables this self test. The target for this self test is priority-based, with the third one being the high-est priority. For example, if all three SFP modules fail, then the third SFP target is activated. If the third SFP module failureresolves, then the second SFP target is activated.THIRD ETHERNET FAIL
