GE L60 Instruction Manual

Also see for L60: Communications manual Communications guide Instruction manual Instruction manual Instruction manual

Contents

GE Multilin L60 Line Phase Comparison System 2-92 PRODUCT DESCRIPTION 2.1 INTRODUCTION22.1.3 ORDERINGThe L60 is available as a 19-inch rack horizontal mount unit or a reduced size (¾) vertical mount unit, and consists of thefollowing modules: CPU, faceplate, power supply, CPU, CTs and VTs, digital input and outputs, transducer inputs and out-puts, and inter-relay communications. Each of these modules can be supplied in a number of configurations specified at thetime of ordering. The information required to completely specify the relay is provided in the following tables (see chapter 3for additional details of relay modules).The L60 is specified with two CT/VT modules (8F and 8P). When the L60 is applied in two-breaker configurations (such asbreaker-and-a-half or ring configurations), the currents from the two CTs are summed internally within the relay or exter-nally. If the voltage is not supplies to the relay, some functions (such as distance, undervoltage, and synchrocheck) will notbe available.Order codes are subject to change without notice. See the GE Multilin ordering page athttp://www.gedigitalenergy.com/multilin/order.htm for the latest options.The order codes for the horizontal mount units are shown below.Table 2–4: L60 ORDER CODES (HORIZONTAL UNITS)L60 - * ** - * * * - F ** - H ** - L ** - N ** - S ** - U ** - W/X ** For Full Sized Horizontal MountBASE UNIT L60 | | | | | | | | | | | | Base UnitCPU T | | | | | | | | | | | RS485 and Three Multi-mode fiber 100Base-FX (SFP with LC)U | | | | | | | | | | | RS485 and Two Multi-mode fiber 100Base-FX (SFP with LC), One 10/100Base-T (SFP with RJ45)V | | | | | | | | | | | RS485 and Three 10/100Base-T (SFP with RJ45)SOFTWARE 00 | | | | | | | | | | No software options03 | | | | | | | | | | IEC 61850A0 | | | | | | | | | | CyberSentry Lvl 1A3 | | | | | | | | | | CyberSentry Lvl 1 and IEC 61850B0 | | | | | | | | | | IEEE 1588B3 | | | | | | | | | | IEEE 1588 and IEC 61850C0 | | | | | | | | | | Parallel Redundancy Protocol (PRP)C3 | | | | | | | | | | PRP and IEC 61850D0 | | | | | | | | | | IEEE 1588 and CyberSentry Lvl 1D3 | | | | | | | | | | IEEE 1588 and CyberSentry Lvl 1 and IEC 61850E0 | | | | | | | | | | IEEE 1588 and PRPE3 | | | | | | | | | | IEEE 1588, PRP, and IEC 61850F0 | | | | | | | | | | PRP and CyberSentry Lvl1F3 | | | | | | | | | | PRP, CyberSentry Lvl 1, and IEC 61850G0 | | | | | | | | | | IEEE 1588, PRP, and CyberSentry Lvl 1G3 | | | | | | | | | | IEEE 1588, PRP, CyberSentry Lvl 1, and IEC 61850MOUNT/COATING H | | | | | | | | | Horizontal (19” rack)A | | | | | | | | | Horizontal (19” rack) with harsh environmental coatingFACEPLATE/ DISPLAY C | | | | | | | | English displayD | | | | | | | | French displayR | | | | | | | | Russian displayA | | | | | | | | Chinese displayP | | | | | | | | English display with 4 small and 12 large programmable pushbuttonsG | | | | | | | | French display with 4 small and 12 large programmable pushbuttonsS | | | | | | | | Russian display with 4 small and 12 large programmable pushbuttonsB | | | | | | | | Chinese display with 4 small and 12 large programmable pushbuttonsK | | | | | | | | Enhanced front panel with English displayM | | | | | | | | Enhanced front panel with French displayQ | | | | | | | | Enhanced front panel with Russian displayU | | | | | | | | Enhanced front panel with Chinese displayL | | | | | | | | Enhanced front panel with English display and user-programmable pushbuttonsN | | | | | | | | Enhanced front panel with French display and user-programmable pushbuttonsT | | | | | | | | Enhanced front panel with Russian display and user-programmable pushbuttonsV | | | | | | | | Enhanced front panel with Chinese display and user-programmable pushbuttonsPOWER SUPPLY(redundant supply mustbe same type as main supply)H | | | | | | | 125 / 250 V AC/DC power supplyH | | | | | | RH 125 / 250 V AC/DC with redundant 125 / 250 V AC/DC power supplyL | | | | | | | 24 to 48 V (DC only) power supplyL | | | | | | RL 24 to 48 V (DC only) with redundant 24 to 48 V DC power supplyCT/VT MODULES 8P | 8F | | | | 4CT, 2 communications channels, standard 4CT/4VT (breaker-and-a-half)DIGITAL INPUTS/OUTPUTS XX XX XX XX XX No Module4A 4A 4A 4A | 4 Solid-State (no monitoring) MOSFET outputs4B 4B 4B 4B | 4 Solid-State (voltage with optional current) MOSFET outputs4C 4C 4C 4C | 4 Solid-State (current with optional voltage) MOSFET outputs4D 4D 4D 4D | 16 digital inputs with Auto-Burnishing4L 4L 4L 4L | 14 Form-A (no monitoring) Latching outputs67 67 67 67 | 8 Form-A (no monitoring) outputs6A 6A 6A 6A | 2 Form-A (voltage with optional current) and 2 Form-C outputs, 8 digital inputs6B 6B 6B 6B | 2 Form-A (voltage with optional current) and 4 Form-C outputs, 4 digital inputs6C 6C 6C 6C | 8 Form-C outputs6D 6D 6D 6D | 16 digital inputs6E 6E 6E 6E | 4 Form-C outputs, 8 digital inputs6F 6F 6F 6F | 8 Fast Form-C outputs6G 6G 6G 6G | 4 Form-A (voltage with optional current) outputs, 8 digital inputs6H 6H 6H 6H | 6 Form-A (voltage with optional current) outputs, 4 digital inputs6K 6K 6K 6K | 4 Form-C and 4 Fast Form-C outputs6L 6L 6L 6L | 2 Form-A (current with optional voltage) and 2 Form-C outputs, 8 digital inputs6M 6M 6M 6M | 2 Form-A (current with optional voltage) and 4 Form-C outputs, 4 digital inputs6N 6N 6N 6N | 4 Form-A (current with optional voltage) outputs, 8 digital inputs6P 6P 6P 6P | 6 Form-A (current with optional voltage) outputs, 4 digital inputs6R 6R 6R 6R | 2 Form-A (no monitoring) and 2 Form-C outputs, 8 digital inputs6S 6S 6S 6S | 2 Form-A (no monitoring) and 4 Form-C outputs, 4 digital inputs6T 6T 6T 6T | 4 Form-A (no monitoring) outputs, 8 digital inputs6U 6U 6U 6U | 6 Form-A (no monitoring) outputs, 4 digital inputs6V 6V 6V 6V | 2 Form-A outputs, 1 Form-C output, 2 Form-A (no monitoring) latching outputs, 8 digital inputsTRANSDUCERINPUTS/OUTPUTS(select a maximum of 3 per unit)5A 5A 5A 5A | 4 DCmA inputs, 4 DCmA outputs (only one 5A module is allowed)5C 5C 5C 5C | 8 RTD inputs5D 5D 5D 5D | 4 RTD inputs, 4 DCmA outputs (only one 5D module is allowed)5E 5E 5E 5E | 4 RTD inputs, 4 DCmA inputs5F 5F 5F 5F | 8 DCmA inputsINTER-RELAYCOMMUNICATIONS(select a maximum of 1 per unit)2A C37.94SM, 1300nm single-mode, ELED, 1 channel single-mode2B C37.94SM, 1300nm single-mode, ELED, 2 channel single-mode2E Bi-phase, single channel2F Bi-phase, dual channel2G IEEE C37.94, 820 nm, 128 kbps, multimode, LED, 1 Channel2H IEEE C37.94, 820 nm, 128 kbps, multimode, LED, 2 Channels72 1550 nm, single-mode, LASER, 1 Channel73 1550 nm, single-mode, LASER, 2 Channel74 Channel 1 - RS422; Channel 2 - 1550 nm, single-mode, LASER75 Channel 1 - G.703; Channel 2 - 1550 nm, Single-mode LASER76 IEEE C37.94, 820 nm, 64 kbps, multimode, LED, 1 Channel77 IEEE C37.94, 820 nm, 64 kbps, multimode, LED, 2 Channels7A 820 nm, multi-mode, LED, 1 Channel7B 1300 nm, multi-mode, LED, 1 Channel7C 1300 nm, single-mode, ELED, 1 ChannelNOTE