Gaggenau BO 450 Use And Care Manual

Also see for BO 450: Use and care manual Instruction manual Installation instruction Installation instructions Installation instructions

Gaggenau BO 450 Use And Care Manual Manual pdf 16 page image

16Turning on1 Set the required heating mode using the functionselector. The chosen heating mode and thedefault temperature are displayed.2 If you want to change the default temperature:set the required temperature with the rotaryselector.The preheating symbol “ appears on the display.The bar continuously shows the preheating status.When the set temperature is reached, a signal soundsand the preheating symbol “ goes off.Note: The oven interior lighting stays switched off at atemperature setting below 160° F (70°C).Switching off:Turn the function selector to 0.Quick heatWith the "quick heat" function, your appliance reachesthe desired temperature especially fast when usingthe top heat, bottom heat, and top + bottom heat typesof heating.To ensure an even cooking result, do not place yourdish in the cooking compartment until "quick heat"has ended.Safety lockFor your protection, the appliance has a safety shut-offfeature. Every heating operation is switched off after12 hours if the appliance is not operated during thistime. A message appears in the display.Exception:programming with the long-term timer.Turn the program selection to 0, after which you canoperate the appliance in the manner to which you areaccustomed.Timer functionsIn the timer menu, set:Š Timerp Stopwatch6 Cooking time (not in the idle state)5 Cooking time end (not in the idle state)Launching the timer menuYou can launch the timer menu from any mode. Onlyfrom the factory settings, program selection is set toS, the time menu is not available.Touch the M symbol.The timer menu appears.TimerThe timer runs independently of the other appliancefunctions. You can enter a maximum of 90 minutes.Setting the timer1 Call up the Timer menu.The "Timer" function Š is displayed.2 Turn the rotary selector to set the desired time.7LPHU