Gaggenau BO 450 Use And Care Manual

Also see for BO 450: Use and care manual Instruction manual Installation instruction Installation instructions Installation instructions

Gaggenau BO 450 Use And Care Manual Manual pdf 20 page image

205 Start with I.The appliance starts. / and the temperature appearin the display. The Sabbath screen will appear asshown.The oven and display lighting is off. The control panelis blocked and no tone can be heard when you touchit.The appliance no longer heats after expiry of the time.The display is blank. Set the program selector to 0.Switching off:To cancel the operation, set the program selector to 0.Yom Tov modeWith this function, the appliance is programmed toperform in three stages.Stage 1 and 2 can be programmed for a maximum totalduration of 74 hours. The duration of Step 3 is 1 hourand cannot be modified.Stage 1: maintains a warm temperature of 122° F(50°C) in the convection heating function. The interioroven lights remain off through this stage.Stage 2: the appliance raises to a desired temperaturesetting and maintains a temperature between 120 and450° F (50 -230°C). For warming and cooking foodsin the convection heating function. The desired timecan be adjusted for this stage. The interior oven lightswill be on during this time.Stage 3: maintains a warm temperature of 122° F(50°C) in the convection heating function for 1 hourafter stage 2 has ended. The interior oven lights willbe on during this time.Note that easily perishable foodstuffs must not be leftin the oven for too long.Setting the Yom Tov mode1 Set the program selector to ž .2 Touch the / symbol.The suggested value of 24h at 185° F (85°C)appears in the display.To set Stage 2 cooking time with rotary selector:1 Touch the $ symbol to adjust the duration ofStage 2 cooking time 6 .2 Set the desired Stage 2 cooking time with therotary selector.3 Touch the C symbol to adjust the end of Stage 2cooking time 5 .4 Select the end time with the rotary selector.5 Change the date if needed by touching the Csymbol to V .6 Rotate the selector to the desired date.7 Confirm settings by touching the ™ symbol.To set Stage 2 temperature:1 Rotate selector to desired Stage 2 temperature.2 Start with I .The temperatures of Stage 1 and Stage 2 appear inthe display. The remaining time to the beginning ofStage 2 is counted down in the display. The Yom Tovscreen will appear as shown.The program will begin with the pre-set warmtemperature without light, then advance to theprogrammed temperature with light until the end ofthe set date and time, and then maintain the pre-setwarm temperature for 60 minutes.The appliance no longer heats after expiry of the time.The display is blank. Set the program selector to 0.Switching off:To cancel the operation, set the program selector to 0.) 6DEEDWKPRGH)) )Æ