Gaggenau BO 450 Use And Care Manual

Also see for BO 450: Use and care manual Instruction manual Installation instruction Installation instructions Installation instructions

Gaggenau BO 450 Use And Care Manual Manual pdf 19 page image

194 Start with I.The appliance assumes a waiting mode. The operatingmode, the temperature, the cooking time and the endof the cooking time appear in the display. Theappliance starts at the calculated time and switchesoff automatically when the cooking time has elapsed.Note: If the 6 symbol flashes: you have not set acooking time. Always set a cooking time first.The appliance switches off after expiration of thecooking time. The 5 pulsates and a signal sounds. Itgoes off prematurely if you touch the ™ symbol, openthe appliance door or set the program selection to 0.Changing the cooking time end:Launch the timer menu. With C, select "End ofcooking time" 5. Set the required cooking time endwith the rotary selector. Start with I.Canceling the entire operation:Set the program selection to 0.Sabbath mode and Yom Tov modeSabbath modeWith this function, the appliance maintains atemperature between 120 and 450°F (50 and 230°C)with the convection heating function.You can keep dishes warm for up to 74 hours withouthaving to switch on or off.Note that easily perishable foodstuffs must not be leftin the oven for too long.Note: You must activate the Sabbath mode in thefactory setting in order to operate the mode.Follow these steps:1 Set the program selector to S.2 Select "Factory setting" with the rotary selector.3 Confirm by touching the ™ symbol.4 Rotate the selector to Sabbath mode :.5 Confirm by touching the ™ symbol.6 Rotate the selector to “activate”.7 Corfirm by touching the ™ symbol.8 Turn the oven off.Setting the Sabbath mode1 Set the program selector to ž.2 Touch the / symbol.The suggested value of 24h at 185° F (85°C)appears in the display. Start with I- or -Change the cooking time and the temperature.3 Changing the cooking time 6 :Touch the $ symbol. Set the preferred cookingtime with the rotary selector. You can set up to 74hours. Confirm by touching the ™ symbol. Thenchanging the temperature becomes an option.4 Changing the temperature:Set the required temperature with the rotaryselector. )6DEEDWKPRGH)