Gaggia 9334GB0B0011 User Manual

Contents

ENGLISH• 9 •Description of parts:FIG. 011 Main switch2 Hot water/brew switch (pump)3 On/off light4 Steam switch (temperature)5 Correct temperature light6 Removable water tank7 Steam/hot water knob8 Turbo frother steam nozzle (removeable)9 Filterholder10 1 cup filter11 2 cup filter12 Basin (removable)13 “Perfect crema” Filter (OPTION)14 Brewing head15 Filterholder gasket16 Shower disc holder17 Shower disc18 Tamper19 Power cable and plug20 Measuring spoon21 Delivery spout22 Tank cover23 Grid (removable)24 Cappuccino maker kit (OPTION)25 Overflowing protection hole26 Anti-fingerprint cleaner for stainless steel27 Level indicator for the basin28 Coffee pod filterInstructions for the power supply cordA A short power-supply cord is provided toreduce risks of getting tangled up or trippingover a longer cord.B Longer extension cords are available andmay be used if care is exercised in their use.C If a long extension cord is used:1 the marked electrical rating of the extensioncord should be at least as great as the electri-cal rating of the appliance.2 if the appliance is of the grounded type, theextension cord should be a grounding-type3-wire cord, and3 the longer cord should be arranged so that itwill not drape over the counter top portabletop where it can be pulled on by children ortripped over.Preparation:1. Remove the water tank cover (22) and fillwith cold water to the MAX line indicatedon tank (6). See FIG. 2.N.B.: Near the word MAX on the tank there isthe overflowing safety hole (25) in case oftank overfilling.The water tank can also be removed, afterremoving the tank cover (22) using thehandle.Re-install tank with water and cover (22).2. Insert plug (19) into a suitable wall outlet (seepoint 1 under “Caution”).3. Turn the power switch (1) to “On”. The on/offlight (3) will switch on.Make certain that the hot water/coffee switch(2) and that the steam switch (4) are in the“Off” position.Starting upThis procedure fills the water boiler with freshwater.This should be done whenever the machine isswitched on.This machine, featuring a pump to brew coffee,is equipped with a self-priming system. Place anempty cup under the brewing head (14), do notinsert filter holder and press hot water/coffeeswitch (2) (pos. “On”).You will hear the sound of the operating pumpand after few seconds, water will start to escapefrom the brewing head (14).