GalileoSky GLONASS/GPS v5.1 (223) User’s ManualGalileoSky Ltd Page 167.3 Economical driving "EcoDrive" and determination of the driving styleThe Terminal can detect rapid acceleration, braking, harsh turns and strikes on bumps. For correct operationof this function, the terminal must detect its orientation in space with respect to the vehicle (the vehicle´srunning direction and the direction in respect to the ground). The driving style data are stored only if dynamicarchive is enabled, FLASHARCHIVE 1 command (section Service commands).The default orientation of the terminal:Driving directionDirection to the groundIf the terminal cannot be installed as illustrated by the picture, user-defined installation may be performedwith the subsequent calibration of orientation.To determine the position of the terminal in respect to the vehicle, perform the following steps:1. Install the Terminal to ensure its rigid link with the vehicle’s body;2. Ensure the horizontal position of the vehicle;3. Execute the shock 0 command, which determines the direction of the terminal to the ground;4. Start driving the vehicle at a speed exceeding 20 km/h; choose straight-line sections of the road whiledriving and keep performing acceleration and braking; in a few minutes the Terminal will performdetermination of the running direction.Data on the driving style can be sent using the mainpackbit 174,1 command.7.4 Data archiving to the external micro SD cardTo create a backup on the external microSD card it is necessary to insert it into the Terminal. If the needarises, it can be ejected from the Terminal and the data can be read in a file manager or explorer with a cardreader. It is also possible to send the archive to the server. CSV-files can be opened both with a text editorand Microsoft Excel. The saved data will be ordered in the following way:MSD:\Track20100201.csv20100202.csv…20100331.csvIf there isn’t enough space on the microSD card, the Terminal tries to delete the oldest files from the Trackfolder.