GalileoSky GLONASS User Manual
                                                                                             | |
Contents
| 
GalileoSky GLONASS/GPS v5.1 (223) User’s ManualGalileoSky Ltd Page 399. ConfiguratorConfigurator is a PC program, which allows: configuring the Terminal via graphic interface and with the help of commands; troubleshooting the Terminal saving the results in a log-file; seeing the Terminal units state in real time mode; downloading monitoring data from the internal memory and a SD card; sending the downloaded data to the server; specifying areas for autoinformer.32 and 64 bit OS are supported: Windows 2000, Windows XP, Windows Vista, Windows 7.9.1 Program installation and runningDownload the Configurator program from the site and launch it.Attention! Program installation may require changes of crucial OS elements. Do not let your antivirusprogram block the installer operation.In case of a security system warning, confirm launching the program.During the installation of the Configurator old drivers will be deleted and new ones will be installed. It ispossible to install the major version of the Configurator or a limited one. The latter one allows uploadingarchive and receiving the current parameters of sensors, but not changing the settings.Start the Configurator program (from Start menu\Programs\GalileoSky\Configurator). Turn on the powerof the Terminal and connect it to the computer via a USB-cable.After the Terminal connection the program loads all the Terminal`s settings parameters automatically. If theprogram identifies the Terminal, all the buttons on the vertical left-hand panel will be active. |
manualsdatabase
Your AI-powered manual search engine