GalileoSky GLONASS User Manual
                                                                                             | |
Contents
| 
GalileoSky GLONASS/GPS v5.1 (223) User’s ManualGalileoSky Ltd Page 579.7 Routes for AutoinformerThis tab contains a graphical Autoinformer zones editor (section Autoinformer function).The Internet access is required to display the map.To edit the zones:1) Insert a micro-SD card into the computer, choose the disk in the drop-down list. The route list andthe track list will be loaded automatically.2) Choose an edited route in the drop-down list or create a new one by clicking “+” on the right side ofthe route list. All stops will be loaded automatically, the map will move to the first stop.3) Edit parameters of the zones. It can be done on the right panel as well as visually by moving redpoints with a mouse.4) Create new zones. Click “+” on the right side of the stops list. A new zone will appear in the middleof the map, and then it can be edited.5) Choose an audio file for the zone. It can be done in the Audio file drop-down list or you can load anew file by clicking “+” on the right side of the stops list. The following formats are supported:wav,mp3, flac, ogg, raw, gsm. The Configurator will automatically convert the file in appropriateformat for the Terminal and copy it to the micro-SD card.6) Press Save route to save changes to the micro-SD card.To make sure all zones are correct, download the track developed after a trip. The Configurator supports thetracks uploaded from the internal memory of the Terminal or stored on the micro-SD card in the csv format. |
manualsdatabase
Your AI-powered manual search engine