GalileoSky GLONASS User Manual
                                                                                             | |
Contents
| 
GalileoSky GLONASS/GPS v5.1 (223) User’s ManualGalileoSky Ltd Page 6710.6 Information commandsCommand format StatusExplanation Allows receiving device status at the moment of sending a command.Dev – this device number;Soft – current firmware version;Pack – last recorded packet serial number;TmDt – Current time and date;Per – Current packet saving period (different when the vehicle is moving and stops);Nav – Coordinates determination accuracy. 0 – coordinates are found.Lat – Latitude;Lon – Longitude;Speed – Linear speed (vehicle speed);HDOP – Horizontal accuracy (The closer to 1, the better);SatCnt – Number of available satellites;A – movement directional angleExample Request: StatusReply:Dev50 Soft=91 Pack=17230 TmDt=10:58:6 20.6.9 Per=60 Nav=0 Lat=60.4007Lon=31.0070 Speed=0.0194 HDOP=0.88 SatCnt=10 A=27.55Command format imeiExplanation Allows obtaining a unique GSM/3G-unit identifier,15byteExample Request: IMEIReply: IMEI 123456789012345Command format imsiExplanation Allows obtaining a unique IMSI identifier of the SIM-cardExample Request: IMSIReply: IMSI 123456789012345;Command format inallExplanation Allows analog input values in0..in7 as well as digital fuel level sensor values andtemperature, and accelerometer values with respect to three axes (10 bit for eachaxis starting with the zero bit) being obtained.Example Request: inallReply:INALL:in0=0,in1=0,in2=0,in3=0,in4=0,in5=0,in6=0,in7=0,RS232=10,1,Acc=332943891;Command format InsysExplanation Allows obtaining external source voltage, internal battery voltage, GPS aerialvoltage, the main power bus voltage of the Terminal and also the temperatureinside the Terminal.Example Request: insysReply: INSYS: Pow=12438,Vbat=4196,Vant=2921,Vdc=4115,Temper=37Command format RS485Explanation Allows receiving a value of the digital fuel level sensor connected via the RS485interface. For each sensor the command prints fuel level and temperature values.Example Request: RS485Reply:RS485 100,0;100,1;100,2;100,3;100,4;100,5;100,6;100,7;100,8;100,9;100,10;100,11;100,12;100,13;100,14;100,15; |
manualsdatabase
Your AI-powered manual search engine