GalileoSky GLONASS User Manual
                                                                                             | |
Contents
| 
GalileoSky GLONASS/GPS v5.1 (223) User’s ManualGalileoSky Ltd Page 69Command format LastCmd NParameters N- number of recorded command, beginning from 0Explanation Allows overlooking the archive of the last executed commands. Returns thecommand source, time, date and text of the command.Example Request: lastcmd 2Reply: USB 095659 20140305 ACTIVECAN 110.7 Service commandsCommand format PIN NParameters N – four-digit PIN-code of SIM-cards.Explanation SIM-card PIN-code and password setting for settings access in the Configurator.The default PIN-code is 0. If you enter the wrong code, the Terminal will be blockedfor 25 seconds, and then reset. PIN-code is identical for both SIM-cards.Example Запрос: PIN 1234Ответ: PIN:1234;Command format Archive typeParameters type – data source for sending to the server:0 – archive from the internal flash-memory;1 – archive from the microSD card.Explanation Selection of data source for sending to the server. After command execution it isnecessary to reset the Terminal. Before you select a microSD card, delete thearchive, created by earlier firmwares, (EraseTrackSD or delete files from Trackcatalogue through the Card-Reader).Example Запрос: ARCHIVE 0Ответ: ARCHIVE:0;Command format FLASHARCHIVE Dynamic,SendOrderParameters Dynamic – whether the dynamic archive structure is used or not:0 – the dynamic archive structure is off, all possible data are saved in archive;1 – the dynamic archive structure is on, only the data selected to be transmitted tothe server are saved in archive.SendOrder – order of data transmission from archive to server:0 – the data are sent deep into the archives; the most current data are sent first,then the oldest ones.1 – the data are sent in chronological order.Explanation Archive structure setting and the setting of the data transmission order to theserverExample Запрос: FLASHARCHIVE 1,1Ответ: FLASHARCHIVE: Dynamic=1, StraightSendOrder=1;Command format EraseCfgExplanation Setting default configuration.Example Запрос: EraseCfgОтвет: ERASECFGCommand format EraseTrackExplanation Deleting all tracks from the memory.Example Request: EraseTrackreply: ERASETRACKCommand format EraseTrackSDExplanation Deleting all tracks from the SD memoryExample Request: EraseTrackSD |
manualsdatabase
Your AI-powered manual search engine