Release Hold— cancels the ‘hold’ feature enabled when the ‘Set OBS and Hold’option was selected. This option returns the GPS III Pilot to automatic sequenc-ing of waypoints along the active route. However, if an OBS course has beenselected, that course setting will be retained until cancelled (as described on page41) or until waypoint passage.To release a waypoint hold and return to automatic sequencing of routewaypoints, highlight ‘Release Hold’ and press ENTER.Big Numbers— allows you to select a different page layout, with a smallercompass-type display and two user-selectable, large-character data fields. If‘Big Numbers’ is selected, ‘HSI’ will appear as an option instead.To toggle between HSI and Big Numbers page formats, highlight ‘BigNumbers’ (or ‘HSI’) and press ENTER.Change Fields— allows you to choose the data displayed on four user-selectabledata fields. There are twenty-nine available data types, including Average (AVG)Speed, Bearing, Distance, ETA at Destination (DEST), Speed, Time to Destination(DEST), Track, and a Trip Odometer. See page 98 for descriptions of data terms.To change a data field:1. Highlight ‘Change Fields’ and press ENTER.2. Highlight the data field you wish to change and press ENTER.3. Select the type of data you want to appear on this field and press ENTER.Restore Defaults— resets all data fields to the factory default settings.To restore the factory default settings, highlight ‘Restore Defaults’ andpress ENTER.‘Big Numbers’ provides asmaller compass-type display,with a pointer indicating thebearing to your destination.The ‘Change Fields’ optionallows you to select from a listof available data types. Fourdifferent items may be dis-played on the HSI Page’s user-selectable data fields.42REFERENCEHSI Page Options