Once a route is added to memory, you can review and/or edit the route from theRoute Edit Page. The Route Edit Page shows the sequence of waypoints for the select-ed route and provides additional options to insert waypoints, remove waypoints orperform trip/fuel planning functions.To edit a route:1. From the Route List, highlight the route you wish to edit and press ENTER. The RouteEdit Page appears for the selected route.2. To change a route waypoint, highlight the waypoint you wish to change and pressENTER. Use the rocker keypad to enter the new waypoint and press ENTER.3. To review the information for a route waypoint, highlight the desired waypoint andpress MENU. A pop-up menu appears with additional options. Highlight ‘Review Wpt’and press ENTER to display the Waypoint Definition Page for the selected waypoint.4. To insert a waypoint in the route, highlight the waypoint that will immediately follow thenew route waypoint and press MENU. A pop-up menu appears with additional options.Highlight ‘Insert Wpt’ and press ENTER to display a blank line for the new waypoint.Enter the name of the new waypoint and press ENTER.5. To delete a waypoint from the route, highlight the waypoint you wish to delete andpress MENU. Highlight ‘Remove Wpt’ on the pop-up menu and press ENTER.To edit a route from the map display:1. Follow step 1 above to select the Route Edit Page, press MENU and select ‘Show Map’.2. To insert a new waypoint move the pointer to the route leg in which the new waypointwill be placed. press ENTER, move the pointer to the new waypoint location and pressENTER to insert the new waypoint.3. To remove a waypoint, move the pointer to the waypoint, press MENU and select‘Remove Wpt’.The Route Options allow foreasy editing of an existingroute.To edit a route, highlight theroute waypoint which isaffected by the change. Ifinserting a waypoint, highlightthe existing waypoint whichfollows the new waypoint. 69REFERENCERoute Editing