Garmin GPS III Owner's Manual

Also see for GPS III: Declaration of conformity Quick guide Owner's manual Owner's manual

Runway Information PageThe Runway Information Page displays the identifier, designations, length, width,surface type and lighting information for the selected airport. This page also providesa graphic diagram of the runways and a map of the surrounding area. The surface typeinformation can be any one of: hard, turf, sealed, gravel, dirt, soft, unknown, or water.The lighting information will indicate one of five lighting schemes: part time, full time,pilot controlled (with frequency), no lighting or unknown.If the selected airport has more than one runway, additional runway data can beviewed by selecting another runway from the runway designation field.To view additional runway data:1. Highlight the runway designation field and press ENTER. A list of the available runwayswill appear.2. Select the desired runway using the rocker keypad and press ENTER.Communication Information PageThe Communication Information Page displays the identifier and radio frequen-cies for the selected airport, along with any usage restrictions which may apply to agiven frequency. When a frequency type is followed by an ‘*’, that frequency will haveusage restrictions, typically based upon sector and/or altitude.To view usage restrictions for a communication frequency:1. Highlight the desired frequency (one with a type that’s followed by ‘*’) and pressENTER. An information page will appear with additional data about the frequency.2. Press QUIT to return to the Communication Information Page.The Runway InformationPage allows you to view therunways and the surroundingarea. Select the runway desig-nation field to view data foradditional runways.The Airport CommunicationInformation Page shows theradio frequencies for theselected airport. Any frequen-cies with restrictions aredenoted by an asterisk (‘*’)after the frequency type. 51REFERENCEWaypoint Information Pages