Delete by Symbol (‘User List’ tab only)— allows you to select a user waypointsymbol and all waypoints with this corresponding symbol will be deleted frommemory.Delete All (‘User List’ tab only)— deletes all user waypoints currently stored inmemory.To delete a user waypoint (or waypoints):1. Select the desired delete option from the list above and press ENTER.2. If ‘Delete by Symbol’ is selected, select the desired symbol and press ENTER.Editing User WaypointsOnce you have created and stored a user waypoint, it may be modified, renamedor deleted at any time through the Waypoint Edit Page. The Waypoint Edit Page forany stored user waypoint can be retrieved by selecting the desired waypoint on themap display, or from the waypoint information pages (‘User Wpt’ or ‘User List’ tabs).To access the Waypoint Edit Page for a user waypoint:1. Press the rocker keypad to highlight the desired user waypoint on the map displayand press ENTER. Or,2. Highlight ‘Waypoints’ from the Main Menu and press ENTER. Select the desired filetab. If ‘User Wpt’ is selected, press MENU, select ‘Edit Waypoint’ and press ENTER. If‘User List’ is selected, highlight the desired waypoint and press ENTER.From the Waypoint Edit Page, highlight the appropriate field to rename a way-point, change its symbol, edit the comment or edit the position.To rename the user waypoint:1. Highlight the waypoint name field and press ENTER.2. Use the rocker keypad to enter the new waypoint name and press ENTER.3. If finished, highlight ‘Done’ and press ENTER.User waypoints can be delet-ed individually, by commonsymbol or all at once. Selectthe desired ‘Delete’ option andpress ENTER.To rename a user waypoint,enter the new name directlyover the old name and pressENTER.58REFERENCEEditing User Waypoints