To change the user waypoint’s symbol:1. Highlight the waypoint symbol field and press ENTER.2. Use the rocker keypad to select the desired symbol and press ENTER. The selectedsymbol will be used to denote the waypoint position on the map display.When a waypoint is created, the time and date of creation is automatically addedas a waypoint comment. You can edit this information or create an entirely newcomment, as needed.To edit the user waypoint comment:1. Highlight the waypoint comment field and press ENTER.2. Use the rocker keypad to enter the desired comment and press ENTER.To edit the user waypoint position:1. Highlight the waypoint coordinates field to change the position coordinates, orhighlight the reference waypoint name, bearing or distance fields to change thereference waypoint information. Press ENTER to begin editing.2. Use the rocker keypad to enter the new information. Press ENTER to accept the newinformation.A user waypoint’s position may also be edited, graphically, using the map display.To move a waypoint’s position on the map display:1. From the Waypoint Edit Page, press MENU to display the Waypoint Edit Options.2. Use the rocker keypad to select ‘Show Map’ and press ENTER.3. Press MENU to display an options window. Select ‘Move Wpt’ and press ENTER.4. Use the rocker keypad to select the new location for the waypoint and press ENTER.The default waypoint com-ment is the time and date thewaypoint was created. Youcan enter your own commentusing the rocker keypad.Edit a user waypoint’sposition by entering the newposition coordinates directlyover the old position.59REFERENCEEditing User Waypoints