September 2015 Service and Repair ManualSpecificationsPart No. 1268498 Z-30/20N • Z-30/20N RJ • Z-34/22 • Z-34/22N 3Hydraulic Specific ati onHydraulic Oil SpecificationsHydraulic Fluid SpecificationsGenie specifications require hydraulic oils which aredesigned to give maximum protection to hydraulicsystems, have the ability to perform over a widetemperature range, and the viscosity index shouldexceed 140. They should provide excellent antiwear,oxidation prevention, corrosion inhibition, sealconditioning, and foam and aeration suppressionproperties.Cleanliness level,minimumISO 15/13Water content,maximum250 ppmRecommended Hydraulic FluidHydraulic oil type Chevron Rando HD PremiumViscosity grade 32Viscosity index 200Optional Hydraulic FluidsMineral based Shell Tellus S2 V 32Shell Tellus S2 V 46Shell Tellus S4 VX 32 ShellShell Donax TG (Dexron III)Chevron 5606ABiodegradable Petro Canada Environ MV 46Fire resistant UCON Hydrolube HP-5046Note: Genie specifications require additionalequipment and special installation instructions forthe approved optional fluids. Consult GenieProduct Support before use.Optional fluids may not havethe same hydraulic lifespan andmay result in componentdamage.Note: Extended machine operation can cause thehydraulic fluid temperature to increase beyond it'smaximum allowable range. If the hydraulic fluidtemperature consistently exceeds 200°F / 90°C anoptional oil cooler may be required.Do not top off with incompatiblehydraulic fluids. Hydraulic fluidsmay be incompatible due to thedifferences in base additivechemistry. When incompatiblefluids are mixed, insolublematerials may form and depositin the hydraulic system,plugging hydraulic lines, filters,control valves and may result incomponent damage.Note: Do not operate the machine when theambient air temperature is consistently above120°F / 49°C.Hydraulic Fluid TemperatureRangeAmbient air temperature1 Chevron hydraulic oil 5606A2 Petro-Canada Environ MV 463 UCON Hydrolube HP-5046D4 Chevron Rando HD premium oil MV
