41To do… Use the command… RemarksEnable information center info-center enable OptionalEnabled by defaultName the channel with aspecified channel numberinfo-center channel channel-numbername channel-nameOptionalSee Table 2 for default channel names.Configure the channelthrough which systeminformation can be output tothe consoleinfo-center console channel{ channel-number | channel-name }OptionalBy default, system information is outputto the console through channel 0(known as console).Configure the output rules ofsystem informationinfo-center source { module-name |default } channel { channel-number| channel-name } [ debug { levelseverity | state state } * | log { levelseverity | state state } * | trap { levelseverity | state state } * ] *OptionalSee “Default output rules of systeminformation.”Configure the format of thetime stampinfo-center timestamp { debugging| log | trap } { boot | date | none }OptionalThe time stamp format for log, trap anddebugging information is date bydefault.Enabling the display of system information on the consoleAfter setting to output system information to the console, you need to enable the associated displayfunction to display the output information on the console.Follow these steps to enable the display of system information on the console (in user view):To do… Use the command… RemarksEnable the monitoring of systeminformation on the console terminal monitorOptionalEnabled on the console and disabled on themonitor terminal by default.Enable the display of debugginginformation on the console terminal debugging RequiredDisabled by defaultEnable the display of loginformation on the console terminal logging OptionalEnabled by defaultEnable the display of trapinformation on the console terminal trapping OptionalEnabled by defaultOutputting system information to a monitor terminalSystem information can also be output to a monitor terminal, which is a user terminal that has loginconnections through the VTY user interface.Outputting system information to a monitor terminalTo do… Use the command… RemarksEnter system view system-view —