44To do… Use the command… RemarksConfigure the channelthrough which systeminformation can be outputto the trap buffer andspecify the buffer sizeinfo-center trapbuffer [ channel{ channel-number | channel-name } |size buffersize ] *OptionalBy default, system information is outputto the trap buffer through channel 3(known as trapbuffer) and the defaultbuffer size is 256.Configure the output rulesof the system informationinfo-center source { module-name |default } channel { channel-number |channel-name } [ debug { level severity| state state } * | log { level severity |state state } * | trap { level severity |state state } * ] *OptionalSee “Default output rules of systeminformation.”Configure the format of thetime stampinfo-center timestamp { debugging |log | trap } { boot | date | none }OptionalThe time stamp format for log, trap anddebugging information is date bydefault.Outputting system information to the log bufferNOTE:The log buffer accepts only log and debugging information; it discards trap information even if you haveconfigured to output it to the log buffer.To do… Use the command… RemarksEnter system view system-view —Enable information center info-center enable OptionalEnabled by default.Name the channel with aspecified channel numberinfo-center channel channel-numbername channel-nameOptionalSee Table 2 for default channel names.Configure the channelthrough which systeminformation can be outputto the log buffer andspecify the buffer sizeinfo-center logbuffer [ channel{ channel-number | channel-name } |size buffersize ] *OptionalBy default, system information is outputto the log buffer through channel 4(known as logbuffer) and the defaultbuffer size is 512.Configure the output rulesof the system informationinfo-center source { module-name |default } channel { channel-number |channel-name } [ debug { level severity| state state } * | log { level severity |state state } * | trap { level severity |state state } * ] *OptionalSee “Default output rules of systeminformation.”Configure the format of thetime stampinfo-center timestamp { debugging |log | trap } { boot | date | none }OptionalThe time stamp format for log, trap anddebugging information is date bydefault.