Operation Manual – AAA RADIUS HWTACACSH3C S9500 Series Routing SwitchesChapter 1 AAA, RADIUS and HWTACACSProtocol Configuration1-10To do... Use the command...Delete a local user byspecifying its typeundo local-user { username | all [ service-type { ftp| lan-access | telnet | ppp | ssh | terminal } ] |password-display-mode }By default, the user database of the system is empty. If the client user wants to accessthe FTP Server (S9500 devices) through FTP, the configuration is required.1.2.5 Setting the Attributes of a Local UserThe attributes of a local user include its password display mode, state, service type andsome other settings.I. Setting the password display modePerform the following operations in system view to configure the mode that a local useruses to display password:To do... Use the command...Set the mode that a local user uses todisplay passwordlocal-user password-display-mode{ cipher-force | auto }Cancel the mode that the local user usesto display passwordundo local-userpassword-display-modeWhere, auto means that the password display mode will be the one specified by theuser at the time of configuring password (see the password command in the followingtable for reference), and cipher-force means that the password display mode of all theaccessing users must be in cipher text.II. Setting/Removing the attributes of a local userPerform the following operations in local user view to set/remove the attributesconcerned with a specified user:To do... Use the command...Set a password for a specified user password { simple | cipher } passwordRemove the password set for thespecified user undo passwordSet the state of the specified user state { active | block }
