Operation Manual – SNMPH3C S9500 Series Routing Switches Chapter 1 SNMP Configuration1-8To do… Use the command…Delete a view undo snmp-agent mib-viewview-name1.2.11 Setting the Size of the SNMP Packet Sent/Received by an AgentYou can use the following commands to set the size of SNMP packet sent/received byan agent.Perform the following configuration in system view.To do… Use the command…Set the size of the SNMP packetsent/received by an agentsnmp-agent packet max-sizebyte-countRestore the default size of the SNMPpacket sent/received by an agent undo snmp-agent packet max-sizeThe agent can receive/send the SNMP packets of the sizes ranging from 484 to 17940,measured in bytes. By default, the size of an SNMP packet is 2000 bytes.1.2.12 Disabling SNMP AgentTo disable SNMP Agent, perform the following configuration in system view.To do… Use the command…Disable SNMP agent undo snmp-agentIf users disable SNMP Agent, it will be enabled whatever snmp-agent command isconfigured thereafter.1.2.13 Extending the Standard linkUp/linkDown TrapsFollow these steps to extend the stand linkup/down traps:To do… Use the command… RemarksExtend the standardlinkUp/linkDown trapssnmp-agent trap ifmiblink extended Available in system viewDisable the extension ofthe standardlinkUp/linkDown trapsundo snmp-agent trapifmib link extended Available in system view
