Operation Manual – Device ManagementH3C S9500 Series Routing Switches Chapter 1 Device Management1-5Note:If you use a CF card or the flash room of a subsequent SRPU expands to 64 MB, youneed not to change the method to update cards. When loading files you only need tochoose the APP files containing the application file of LPUs to update commoninterface cards and LPUs.Perform the following configuration in system view.To do… Use the command…Download the hostapplications of LPUs to thesystem memoryupdate l3plus slot slot-no filename file-nameftpserver server-name username user-namepassword password [ port port-num ]Caution:z When you use the update l3plus command to update LPUs, you must use theswitch host APP file which includes the load program of L3PLUS LPUs.z The maximum size of L3PLUS update file loaded by the update l3plus command is24 M.1.3 Displaying and Debugging Device ManagementTo do… Use the command… RemarksDisplay the module typesand running states ofeach carddisplay device [ detail |[ shelf shelf-no ] [ frameframe-no ] [ slot slot-no ] ]Available in any viewDisplay the applicationdeployed on next startup display boot-loader Available in any viewDisplay the running stateof the built-in fans display fan [ fan-id ] Available in any viewDisplay the status ofswitch memory usedisplay memory [ slotslot-no ] Available in any viewDisplay the state of thepowerdisplay power[ power-id ] Available in any viewDisplay CPU occupancy display cpu [slot slot-no ] Available in any view
