Operation Manual – OSPFH3C S9500 Series Routing Switches Chapter 1 OSPF Configuration1-35To do... Use the command...Reset one or all OSPF processes reset ospf [ statistics ] { all | process-id }Resetting the OSPF process can immediately clear invalid LSAs, and make themodified router ID effective or the DR and BDR are re-elected.1.4 Displaying and Debugging OSPFTo do... Use the command...Display the brief information of theOSPF routing process display ospf [ process-id ] briefDisplay OSPF statistics display ospf [ process-id ] cumulativeDisplay LSDB information of OSPFdisplay ospf [ process-id ] [ area-id ]lsdb [ brief | [ asbr | ase | network |nssa | router | summary ] [ ip-address ][ originate-router ip-address |self-originate ] [ verbose ] ]Display OSPF peer information display ospf [ process-id ] peer [ brief ]Display OSPF next hop information display ospf [ process-id ] nexthopDisplay OSPF routing table display ospf [ process-id ] routingDisplay OSPF virtual links display ospf [ process-id ] vlinkDisplay OSPF request list display ospf [ process-id ]request-queueDisplay OSPF retransmission list display ospf [ process-id ]retrans-queueDisplay the information of OSPF ABRand ASBR display ospf [ process-id ] abr-asbrView OSPF inter-area routesummarization informationdisplay ospf [ process-id ]abr-summaryDisplay the summary information ofOSPF imported routesdisplay ospf [ process-id ]asbr-summary [ ip-address mask ]Display OSPF interface information display ospf [ process-id ] interfaceDisplay OSPF errors display ospf [ process-id ] errorDisplay OSPF Graceful Restartinformationdisplay ospf [ process-id ]graceful-restart statusDisplay the state of the global OSPFdebugging switches and the state of thedebugging switches for each processdisplay debugging ospf
