Operation Manual – ACSEI ServerH3C S9500 Series Routing Switches Chapter 1 ACSEI Server Configuration1-2z Control of the ACSEI clients on the ACSEI server. For example, you can closeACSEI client, or restart ACSEI client on the ACSEI server.Note:An ACSEI server can register multiple ACSEI clients.1.1.2 ACSEI TimersAn ACSEI server has two timers, the clock synchronization timer and the monitoringtimer.z The clock synchronization timer can be set by users to periodically trigger theACSEI server to send clock synchronization advertisements to ACSEI clients.z The monitoring timer can be set by users to periodically trigger the ACSEI serverto send monitoring requests to ACSEI clients.An ACSEI client starts two timers, the registration timer and the monitoring timer.z The registration timer is used to periodically trigger the ACSEI client to multicastregistration requests.z The monitoring timer is used to periodically trigger the ACSEI client to sendmonitoring requests to the ACSEI server.1.1.3 ACSEI Server Startup and RunningACSEI server starts up and runs in the following procedures:1) Run the ACSEI client application to enable ACSEI client.2) Start up the device and enable the ACSEI server function on it.3) The ACSEI client multicasts registration requests.4) After the ACSEI server receives a valid registration request, it negotiatesparameters with the ACSEI client and establishes connection with the client if thenegotiation succeeds.5) The ACSEI server and the ACSEI client mutually monitor the connection.1.2 ACSEI Server ConfigurationThe section covers these topics:z Enabling ACSEI Serverz Configuring the Clock Synchronization Time Intervalz Configuring the Monitoring Time Intervalz Closing an ACSEI Clientz Restarting an ACSEI Client
