2OVERALL DESCRIPTIONConsole OperationThe console is designed with everything that is necessary for you to program and operate your OmniLT control and securitysystem. Because we feel that it is very important for you to feel comfortable with the operation of your OmniLT, we recommendthat you start by becoming familiar with your console.The OFF (1), DAY (2), NIGHT (3), and AWAY (4) keys are called shortcut keys. This means that you may press these keys togo directly to that function without using the menu key.LTEMPSECURITYMESSAGECANCELEVENTSALLCONTROLMENUSETUP AUXPOLSTATUS FIREBUTTONSO MNI1- ' OFF 'The ' OFF ' key is used to disarm (deactivate) the security system, reset emergency alarms, and silence all sirens and sounders.2- ' DAY 'The ' DAY ' key is used to arm the security system in the Day mode. In the Day mode, the perimeter zones (doors and windows)are protected, however, the interior zones are not armed so that you may move about freely inside. In this mode, there is an entrydelay on entry-exit zones.3- ' NIGHT 'The ' NIGHT ' key is used to arm the security system in the Night mode. In the Night mode, the doors, windows, and non-sleeping area motion detectors are armed. In this mode, there is no entry delay so the alarm will be activated immediately if anyzone is violated.4- ' AWAY 'The ' AWAY ' key is used to arm the security system in the Away mode. In the Away mode, all zones (doors, windows, motions,etc.) are armed. There is an entry delay on entry-exit zones, so that you can disarm the system when you return through the door.5- Down ArrowThe Down Arrow key is used to scroll through menus and lists. The down arrow is used to scroll down the list from first to last(for example, when the first program is being displayed, pressing the down arrow will cause the next program to be displayed).
