HAI OMNI LT Owner's Manual

Also see for OMNI LT: Owner's manual Installation

Contents

HAI OMNI LT Owner's Manual Manual pdf 32 page image

24Before any digits are entered, the ' # ' key may be used to switch between specifying the rate in minutes, seconds, and hours.After you choose between minutes, seconds, and hours, enter the rate (2-99 seconds, 1-99 minutes, or 1-10 hours).Next, enter a number (0-100) to indicate the final lighting level (intensity) desired.LIGHTING LEVEL:0-100%:The keypad will beep and the lighting level will be adjusted. The keypad display top line will read:Entry Lights 40% AT 1HControlling Compose UnitsEntry Lights0=OFF 1=ON 2=DIM 3=BRT ↓Entry Lights4=SCN 9=TIM #=STA↑¾ Press 0 (OFF) to turn the selected unit off.¾ Press 1 (ON) to turn the selected unit on.¾ Press 2 (DIM) to dim the selected unit (1-9 steps, each step is 10% from its current level).¾ Press 3 (BRT) to brighten the selected unit (1-9 steps, each step is 10% from its current level).¾ Press 4 (SCN) to set a group of lights to their predefined lighting levels.¾ Press 9 (TIM) to time the selected unit (On or Off). Timed commands may be from 1-99 seconds, 1-99 minutes or 1-18hours.¾ Press # (STA) to view the current status of the unit.Scene Command (Compose)If Compose lighting switches are part of your installation, the Scene (SCN) command is used to set a group of lights to predefinedlighting levels. There is an Off command, an On command, and 12 lighting scenes for each group of Compose lighting switches.SCENE:0=OFF 1=ON 2-13=A-LEnter 0, followed by the ' # ' key, to turn the lights that are part of the selected group off. Enter 1, followed by the ' # ' key, to setthe lights that are part of the selected group to predefined lighting levels.To set the lights in the selected group to a predefined scene, enter the Scene number 2-13 (which corresponds to Scene A-L,respectively), followed by the ' # ' key. All lights that are part of the selected group are set to the predefined lighting levels for theselected Scene.Timed CommandsThe timed commands allow a units to be turned on or off for a specified period of time. The unit may be turned On for 1-99(minutes or seconds), or 1-18 hours, then Off; or turned Off for 1-99 (minutes or seconds) or 1-18 hours, then On.Lighting units (1-16) may also be dimmed or brightened for a specified period of time. The unit may be dimmed (1-9) steps for1-99 (minutes or seconds), or 1-18 hours, then brightened back to its previous level; or brightened (1-9) steps for 1-99 (minutes orseconds), or 1-18 hours, then dimmed back to its previous level.To enter a timed command, you must first enter the unit that you want to control. From the control menu, enter the unit number(or scroll to it using the arrow keys), then press the ' # ' key.