54Control Unit / Switch Press Event ButtonsThis Event Button is activated upon the following:• When the specified Unit is turned on or off• When the top-rocker or bottom-rocker is pressed on a UPB, RadioRA, or ALC switch• When a button is pressed on a UPB 6-Button or 8-Button Keypad• When a button is pressed on a RadioRA Master Control• When a button is pressed on a ALC 4-Button Scene Switch Module• When a button is pressed on a CentraLite StarLite KeypadPress the 1 (CTRL) key to select the "When Command" for a control unit event.UNIT:ENTER UNIT ↓The unit may be selected by entering the unit number followed by the ' # ' key or by using the arrow keys to scroll through a list ofunit names. Select the desired unit. Next, you are prompted to specify the event that activates the program:WHEN Porch Light:0=OFF 1=ON 2=SWITCHPress the 0 (OFF) key to select when the unit turns off or press the 1 (ON) key to select when the unit turns on (this program isexecuted whenever the unit is turned off or on).Press the 2 (SWITCH) key to select only when the top-rocker or bottom-rocker is pressed at a UPB, RadioRA, or ALC Switch(locally at the Switch) or when a button is pressed on a keypad.SWITCH:0=OFF 1=ON 2-11=SW1-SW10Press "0" to select only when the bottom-rocker (off) is pressed on the Switch. Press "1" to select only when the top-rocker (on)is pressed on the Switch. Press "2-9" (see the Corresponding Switch Table) to select when that button is pressed on a keypad.Press the ' # ' key to enter your selection.Corresponding Switch TableSwitch OmniLT UPB 6-ButtonKeypadUPB 8-ButtonKeypadRadioRAMaster ControlALC 4-Button StarLiteKeypad1 2 On Button 1 or E 1 1 12 3 Off Button 2 or F 2 2 23 4 A 3 or G 3 3 34 5 B 4 or H 4 45 6 C 5 or I 56 7 D 6 or J 67 8 7 or K 78 9 8 or L 89 10 910 11 10Security Mode Event ButtonsPressing the 2 (SEC) key allows you to select the event button that will be activated when a security mode changes:0=OFF 1=DAY 2=NIGHT3=AWAY 4=VACATION ¦