HAI OMNI LT Owner's Manual

Also see for OMNI LT: Owner's manual Installation

Contents

HAI OMNI LT Owner's Manual Manual pdf 68 page image

60Timed Level CommandUsing HAI PC Access Software, you can create programs to set the light level for a specified time. For example, when the FrontDoor opens and it is dark outside, you can have the Foyer Light illuminate at 50% for 5 minutes with a single program line.WHEN FRONT DOOR NOT READY &IF DARK: FOYER LIGHT TO 50% FOR 5 MINUTESAt the end of the timer duration, the light will return to its previous state. For example if the light level of the Foyer Light was at25% prior to the Front Door opening, the light level will return to 25% five minutes after the door opens.Program Security CommandsPress the 2 (SECURITY) key to arm and disarm the security system, or to bypass and restore an individual zone. The followingmenu is displayed:0=OFF 1=DAY 2=NIGHT3=AWAY 4=VACATION ↓5=DAY INST 6=NIGHT DLY8=BYPASS 9=RESTORE ↑Select (0-6) to arm the system into the desired mode or select the 8 key to Bypass and the 9 key to Restore a security zone.Program Button CommandsSelect the 3 (BUTTON) key to program a button to automatically execute. Specify the button to be executed - See ButtonPrograms.Program All On / All Off CommandsSelect the 4 (ALL) key to program All Lights On and All Units Off commands. It is also used to program Leviton Scenes, UPBLink, RadioRA Phantom Button, or CentraLite Scene.ALL0=OFF 1=ON 2=SCN 3=LINK↓ALL4=PHANTOM 5=CENLIT ↑Program Video CommandsUsing HAI PC Access Software, you can create programs to display a camera automatically on an OmniTouch with Videotouchscreen when an event occurs.You can specify which camera and which touchscreen(s) will display the video when the event takes place. When the event takesplace, it switches each of the specified touchscreens to full screen video.Program Temperature CommandsSelect the 5 (TEMP) key to command thermostats, energy saver modules, and temperature sensors. Specify the desiredtemperature command - See Temperature.Raise or Lower Temperature CommandUsing HAI PC Access Software, you can create programs to raise or lower temperatures by a specified number of degrees(between 1-45 degrees Fahrenheit or 0.5 – 25.0 degrees Celsius). When using this command, specify either raise or lower theheat or cool temperature setpoint and number of degrees.