HAI OMNI LT Owner's Manual

Also see for OMNI LT: Owner's manual Installation

Contents

HAI OMNI LT Owner's Manual Manual pdf 28 page image

20Controlling UnitsThe control menu is used when controlling lights and appliances. To enter the control menu, from the top-level display or fromthe main menu, press the 1 (CTRL) key on the console keypad. OmniLT will automatically display the first named item in thatlist. The down arrow key can then be used to scroll through the list, and the ' # ' key is used to select the item. If the specific itemnumber is known, enter the item number followed be the ' # ' key, or scroll up and down among the named items.After the unit has been selected, press the ' # ' key. The console will display:Controlling a Room of HLC LightingLiving Room0=OFF 1=ON 2-5=A-D ↓Living Room6=SET #=STA↑¾ Press 0 (OFF) to turn the selected room off (all lighting loads in the room are turned off).¾ Press 1 (ON) to turn the selected room on (all lighting loads in the room are turned on).¾ Press 2 (A) to set all of the lighting loads in the selected room to their preset levels for Scene A.¾ Press 3 (B) to set all of the lighting loads in the selected room to their preset levels for Scene B.¾ Press 4 (C) to set all of the lighting loads in the selected room to their preset levels for Scene C.¾ Press 5 (D) to set all of the lighting loads in the selected room to their preset levels for Scene D.¾ Press 6 (SET) to set up a lighting scene for the all of the lighting loads in the selected room (On, A-D).¾ Press # (STA) to view the current status of the room.Configuring Lighting Scenes in an HLC RoomLighting scenes are created by configuring light levels for HLC lighting devices in a room. Each HLC device in a room can storeup to four different preset lighting scenes (Scenes A-D) and one “On” Scene (preset lighting levels for each device when the roomis turned on). To set a lighting scene using the Omni console, adjust all of the HLC devices in the room to the desired lightinglevels. The desired lighting levels (0% - 100%) may be set manually at the switch, or by issuing commands from the OmniLTcontroller. After the desired lighting levels are set, use the 6 (SET) command to save the new “light levels” for each device in theselected room.Living Room SET1=ON 2-5=A-DWhen the scene command is transmitted (either using a Room Controller or by the OmniLT controller), each HLC device in thespecified room will brighten or fade to its preset level for the selected scene.Each lighting scene can also be set or easily changed using the pushbuttons on the HAI UPB™ 6-Button Room Controller, asfollows:Step Operation1 Press the desired pushbutton on the HAI UPB™ 6-Button Room Controller to activate the current scene (preset lightinglevel) in each of the HLC devices.2 Use the local Decora-style rocker switch on each UPB™ Wall Switch Dimmer(s) to set the desired lighting level(s) orissue commands from the OmniLT controller.3 Press the pushbutton on the HAI UPB™ 6-Button Room Controller five (5) times quickly.4 Each UPB™ Wall Switch Dimmer will flash its lighting load one time to indicate that the new level has beenconfigured.